Batca Fitness Systems
16
LD-9 Owner's Manual
Final Assembly and Troubleshooting
Top Plate
200lb Stack
Weight Stack Decals:
IMPORTANT - Check These Components Before Using Gym:
Each Cable with a threaded bolt on
either end must be threaded at least
1/2” into its attachment, whether it
be a Free Floater, Lockout Free
Floater, or the Top Plate of the
weight stack. Each must also be
secured with a 1/2” Jam Nut to
ensure a safe and proper connection.
Record your serial number on the front of this manual
and keep for your records. The serial number can be
found on the side of the cage as seen in the figure to the
left.
Guide Rod
Clean guide rods with a lint-free cloth and apply a thin layer of silicone lubricant (Part # BFH-
50262) to each guide rod. This will ensure a glass smooth performance from your weight stack.
200lb Stack
(Standard)
Begin numbering the
weight stack on the
fourth plate down from
the top as shown in the
figure to the left.
Discard the three
remaining weight plate
decals.
To counter balance the
seat, pin weight stack on
the third plate from the
top as shown in the
figure to the left. Use a
BHSCS 3/8” x 4 3/4”
bolt.
