Batca FUSION4, Owner'S Manual

Page: 11 / 34

www.batcafitness.com
11
Fusion 4 Lower Body Station
Figure 2
Step 2:
Item # Part # Description Qty
1 BFM-10747 Left Vertical Support 1
6 BFM-51490 Guide Rod Holder 1
7 BFM-51082 Shroud 1
125 BFM-52410 Front Shroud 1
8 BFM-51051 Guide Rod 2
9 BFM-50256 Weight Plate 19
10 BFM-50529 Rubber Donut 2
11 BFM-10299 Top Weight Plate 1
35 BFM-51173 Weight Stack Pin 1
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Make Sure All
Hardware Is
Tightened Before
Next Step.
Item # Part # Description Qty
45 BFP-52394 SHCS 3/8”-16 x 2-1/2” 1
47 BFP-51799 SHCS 3/8”-16 x 5” 3
49 BFH-50630
FHSCS 3/8"-16 x 3/4”
2
56 BFP-52401 BHSCS 3/8”-16 x 1/2” 4
51 BFH-52340 SHCS 3/8”-16 x 3/4” 2
73 BFH-50146 3/8” Flat Washer 13
74 BFH-50157 3/8” Nylock 3
75 BFH-50147 3/8” Lock Washer 7
This 3/8” Nylock and
Flat Washer are
from step 1. DO NOT
remove the nylock
or install the Left
Vertical Support until the
Weight Stack and the
Shrouds have been
completely assembled.
Assemble Last
(see note)
BHSCS
3/8” X 1/2”
(Qty=4)