background image

 

www.batcafitness.com

 

9

 

AXIS Accessory Module Owner's Manual

 

Batca Fitness Systems strives to give you the very best in quality, performance and safety through carefully engineered 

designs and excellent workmanship.  In order to maintain this high level of quality the preventative maintenance schedule 

below should be followed. 
Clean upholstery, grips, and roller pads with mild soap and water generally after every use.  The guide rods, chrome slides and 

frame should be cleaned with a cotton cloth.  Upon cleaning the guide rods, a thin layer of Silicone or Teflon gel should be 

applied to each rod to ensure a glass smooth performance.  
An overall inspection should be done before each workout.  If the warning and safety decals are worn or have been removed 

they should be replaced immediately.  The cables and cable systems should be inspected for signs of wear and proper 

tension.  In order to check cables properly you should carefully run the cable through your fingertips, checking for signs of 

wear, cracks, burs and thinning spots.  Replace any part at first signs of wear.  Cables should be adjusted for proper tension.  

See assembly instructions for this detail.  All hardware, stops, and adjustments should be checked and tightened as required. 
The guide rods on your machine should be cleaned and lubricated regularly.  This will ensure a glass smooth performance 

from your weight stack.  A thin layer of either Silicone or Teflon gel should applied to each rod.  Each pillow block bearing and 

flange bearing has a grease fittings that must be lubricated regularly.  Use general purpose bearing grease and follow the 

schedule below.  
Although cables should be inspected daily, it is important that ALL cables be replaced as directed in the schedule below.  

Please note that at any first sign of wear the cable should be replaced immediately.   
If there are any questions concerning maintenance, please contact your local Batca dealer or contact Batca Fitness Systems 

directly at: 

Batca Fitness Systems 

(919) 255-1233 

www.batcafitness.com 

 

Preventive Maintenance 

  

Daily 

Weekly 

Monthly 

Quarterly 

Years 

Commercial  Home  Commercial  Home  Commercial  Home 

Commerci

al 

Home  Commercial  Home 

Clean 

  

  

  

  

  

Frame 

  

  

 X 

  

 

 X 

  

  

  

Inspect 

  

  

  

  

  

Overall 

  

  

  

  

  

  

  

  

Safety Decals 

 

 

 

 

 

Hardware 

  

  

  

 

  

  

  

  

Frame 

  

  

  

  

  

X  

  

  

Summary of Contents for AXIS Accessory Module












Reviews: