Batavus ION PMU4, Manual, Page: 92 / 242

92
FR
A
N
Ç
A
IS
92
E
ng
lis
h
Message Diagnosis Solution
E16
Constant activity of the
power sensor
Calibrate by holding the
light button pressed for 5
seconds.
E19
Battery pack outside
the temperature range
Wait until the battery pack
is within the temperature
range. The charging will then
automatically continue.
E20 Service needed
Contact your dealer for
the planned maintenance
service.
E23
Serial number motor
incorrect
This battery pack has not
been installed on the bicycle.
Please contact your dealer.
E30
No communication with
torque sensor
Turn on the pedal assistance
and check if the battery pack
is placed correctly.
E32
Battery electronics are
too warm.
Let the battery pack cool
down and switch on the
pedal assistance again.
E34
Control unit does not
support accessories
Please contact your dealer.
E35
No communication with
throttle
Please contact your dealer.
E39
Wrong charger
connected
Connect the correct charger.
E45
Max temperature
of motor controller
reached
Allow the motor controller
to cool before switching on
support again.
E55
Unknown serial number
of the motor or error in
motor communication
Please contact your dealer.
E
N
G
LI
S
CH