Batavus ION PMU4, Manual, Page: 73 / 242

73
FR
A
N
Ç
A
IS
73
En
glis
h
3.8.7 Automatic charging
The 'automatic charging' function only works on e-bikes with a rear
wheel motor.
The e-bike will automatically generate energy when pressure is not
applied to the pedals. This makes sure that the battery pack can be charged
while cycling.
To use this function, you must first switch it on in the menu.
The automatic charging function works up to about 35 km/h and
approximately 80% of the battery charge depending on the temperature.
Switching on automatic charging
The selected many setting will be active immediately and will continue to
apply until it is again adjusted on the display menu.
If the automatic charging function has been activated and no pressure is
applied to the pedals, the battery pack will be charged automatically. You will
feel a slight resistance on the motor while charging and the "Charging" text
will be displayed on the display.
- Hold the pressed for 3 seconds.
- Use the and to go to the Functions
menu.
- Use the to go right.
- Use the ( and) to go to Automatic
charging.
- Again press the .
- Select the required option using and
.
- Again press the to set the required
option.
- Press the several times to return to the basic display.
FUNCTIONS
Trip counter
Sound
Lighting
Automatic charging
E
N
G
LI
S
CH