Batavus E-go RemovE, Manual, Page: 31 / 101

30
EN
G
LI
SH
______________________________________________________________________
_________________________________________________________________________
9
3 Handlebar control
3.1 Display
3.1.1 Information
Paragraph 3.2 describes which pieces of information can be read on the display and how
they can be requested.
3.1.2 Disconnecting and securing
You can remove the display by rotating it to the
left and then pulling it towards you.
Even duri ng ‘sleep mode’, your E-go
®
Remov E consumes energy.
To prevent damage to the battery, the
display should be removed whenever the bicycle
is not in use. Paragraphs 2.2.3 and 2.2.4 provide
detailed instructions for protecting and storing the
battery.
3.1.3 Adjusting position
The position of the display can be adjusted by using the
screws that hold it in place (S).
S