Batavia BT-CS006, Operating Instructions Manual

Page: 24 / 60

6. Make sure that fixed spacers for securing the
tool inserts have the same diameter and at
least 1/3 of the cutting wheel diameter.
7. Make sure that any fixed spacer rings are
parallel to one another.
8. Handle the tool inserts with care. Preferably,
store these in their original packaging or in
special containers. Wear safety gloves to
improve safe gripping and to further reduce
the risk of injury.
9. Before using the tool inserts, make sure that
all the safety devices are suitably fastened.
10. Make sure before use, that the tool insert you
are going to use corresponds to the technical
requirements of this electric power tool and is
suitably fastened.
11. Only use the saw blade provided when
working with wood; never use it for working
with metals.
2.9 rESIduAl rISKS
Even when you use this electric power tool
correctly, residual risks remain. The following
dangers may arise in connection with the
construction and application of electric power
tools, among other things:
1. Damage to health resulting from hand-arm
vibrations if the electric power tool is used over
a long period of time, or is incorrectly operated
or maintained.
2. Injuries or damage to property, caused by
flying tool inserts, which unexpectedly spin out
of the electric power tool due to sudden
damage, wear or incorrect mounting.
3. Burns and cuts, in cases where the tool inserts
are brought into contact with bare skin
immediately after use.
warning! These electric power tools produce an
electromagnetic field during operation. Under
certain circumstances, this field may impair the
operation of active or passive medical implants.
In order to reduce the danger of serious or fatal
injuries, we recommend that persons with medical
implants consult their doctor and the
manufacturer of the medical implant before
operating the electric power tool.
24
TM
use
1. Pay attention to the operating instructions of
the electric power tool with which you are
using the tool insert.
2. Before start-up, attach an appropriate safety
device to the electric power tool. Do not carry
out any work without protection provided
through safety devices.
3. Use personal protective clothing and
equipment suitable for the type of machine
used and the application undertaken, e.g. eye
and face protection, hearing protection,
respirators, safety shoes, safety gloves and
other protective clothing.
4. Only undertake work for which the tool insert is
suitable (taking into consideration use
restrictions, safety instructions and other data).
5. Switch off the electric power tool before
placing it on the workbench or on the floor and
wait until the tool insert is stationary.
6. For cut off grinding, place the tool insert
directly in the gap, so that the electric power
tool does not tilt.
7. Do not go backwards and forwards in the
material, rather pull the tool calmly through it.
8. Work only at right angles and in straight lines,
to avoid the danger of cracking in the core or
segments breaking off.
9. Do not exert a strong grinding pressure; the
weight of the electric power tool will suffice.
10. Do not include any cooling breaks.
11. Caution! The tool insert will become very hot
during the work; only touch it with safety
gloves, after it has cooled down.
2.8 SAFETy InSTruCTIonS For hAndlIng
SAw blAdES
1. Only use tool inserts if you are familiar with
their handling.
2. Do not exceed the maximum rotation speed
The maximum permissible rotation speed
indicated on the tool insert must not be
exceeded. Remain within the rotation speed
range, if indicated.
3. Do not use cracked tool inserts. Throw away
any cracked tool inserts. Repair is not permitted.
4. Clean off any contamination, fat, oil or water
from the clamping surfaces.
5. Do not use any loose spacers or bushes to
reduce the size of the holes in the circular saw
blades.