13
English
Please note the included
General Safety Notes and
the following safety notes
to avoid malfunctions, damage or
physical injury:
Specific safety instructions
Hold the machine by the insulated
gripping surfaces where the acces-
sory may contact hidden wiring or
the mains cable. If the accessory
contacts a ‘live’ wire, the exposed
metal parts of the machine can also
become ‘live’. Risk of electric shock.
• If you are working with the sand-
ing machine, wear always ear
protectors and dust mask.
• The sanding machine is not suita-
ble for wet sanding.
• Check if the switch is not in posi-
tion “ON”, before you connect
the mains plug to the mains
voltage.
• Keep the mains lead always away
from moving parts of the tools.
• Use safety glasses, especially
when you sand above your head.
• Do not bring pressure to your
machine, this will only delay the
sanding.
• Keep packaging material out of
reach of children. There is risk of
suffocation!
• Please make sure the mains volt-
age available in your area corre-
sponds to the operating voltage
stated on the type label.
• Do not continue to use the unit if
the unit or the line cord are dam-
aged. Repair work must be done
by a qualified service technician.
• Do not conduct the line cord over
sharp edges and corners or hot
surfaces.
• Switch the unit off and unplug it if
you don't use it or clean it.
• Grinding some material can lead
to the formation of hazardous or
explosive dust. For your safety
wear dust protection, ear and eye
protection. Lead the manual
before using the unit.
• Do not disassemble the unit or
attempt to repair it yourself. It
does not contain parts servicea-
ble by you. In the case of ques-
tions or problems, turn to our
customer support.
Contact or inhalation of
dust coming free during
sanding (e.g. lead painted
surfaces, woods and metals), can
endanger the health of operator and
bystanders. Always wear appropriate
personal equipment as a dust mask
and use the dust bag during sanding.
Wear safety goggles
Wear hearing protection
Immediately switch off the
machine when:
• Excessive sparking of the carbon
brushes and verticiliosis in the
collector.
• Interruption of the mains plug,
mains lead or mains lead
damage.
• Defect switch
• Smoke or stench of scorched
isolation
7062051_Electric_file_Ma_#1606-14.indb 13
16-06-16 09:23
