20
TM
VI.Transfer Photos and Videos to
the PC/TV
Use the supplied USB cable (16)
to connect the camera to a free
USB port of the PC. The PC has
to be switched on before you
connect the camera to it. Press
the OK key (11) to confirm the
highlighted menu item “MSDC”. A
few seconds later the camera is
detected by the PC as a mass
storage device. The saved files
can be watched or transferred/
downloaded to the PC. While the
camera is connected to the PC,
the internal battery of the camera
gets charged and the battery icon
appears on the bottom left side of
the display.
Alternatively, removed the SD card
from the camera and insert it into
an external suitable card reader
which is connected to the PC.
Use an audio video cable (15)
which is available as an option to
connect the camera to your
standard TV set.
VII.Webcam
Use the supplied USB cable (16)
to connect the camera to a free
USB port of the PC. A menu
appears on the LCD screen. Use
the DOWN key (7) to highlight the
menu item “PC CAM”. Press the
OK key (11) for confirmation. Now
the camera is ready to be used as
a webcam (webcam software is
required).
RESET THE CAMERA
If any malfunction occurs during
use, press the RESET key (8)
which is located at the upper side
of the housing. Use a thin but not
pointy object to push the key
inside the recess until is audibly
clicks. The camera will be
restarted and reset to the factory
default settings.
CLEANING AND STORING
• Before cleaning the unit
disconnect the camera from the
power supply.
• Use only a damp cloth to clean
the camera system. Do not use
aggressive chemicals or
abrasives.
• Store the camera indoors at a
dry place that is protected from
dust, dirt and extreme
temperatures.
USEFUL ACCESSORY
The following useful accessory can be
purchased at Batavia:
12 V USB Cigarette Lighter Adaptor –
7061311 Ma # 1202-07.indd 20
07-02-12 13:38