8
X3 Classic Instructions
On the handle the top red button is your ON/OFF switch which powers up & turns off power to cart.
The “lightning bolt” will light up to indicate power is “ON”.
The speed control dial (rheostat) on the side of the handle
rotates to sets the speed desired. Clockwise increases the
speed, counterclockwise reduces the speed.
The green button is our STOP/GO feature. It works with the speed control to allow you to stop the
cart at the current speed. When you are ready to resume, press the button again and the cart will return
to the last speed set. This option saves you from turning the speed dial back to zero and re-setting it
each time.
Timed Distance Advance Function
(X3 Sport & X3R only)
Press once, the caddy will run caddy 10 yards/meters and stop.
Press twice, the caddy will run caddy 20 yards/meters and stop.
Press three times, the caddy will run caddy 30 yards/meters and stop.
OPERATING INSTRUCTIONS
X3 Classic - X3 Sport - X3R
X3 Series
T Handle Controls
X3 Classic
Faceplate
X3 Sport/X3R
Faceplate
Slow Fast
X3 Sport Instructions
The top red button has two functions - ON/OFF and STOP/GO
1. ON/OFF - Controls the caddy’s power supply. Press and hold for 3-5 seconds in order to
switch the caddy ON or OFF. The
“lightning bolt”
will light up indicating power is “ON”.
2. STOP/GO - Once the cart is powered up, you can use the power button along with the speed
control dial (rheostat) to stop the cart at the current speed and then resume at the that same
speed. Set the desired speed with the speed control dial (rheostat) and then press the power
button for one second when you want to stop. Press the power button again and the caddy will
resume at the same speed.
Speed Control Dial (Rheostat)
The Speed Control Dial (rheostat) is located on the side of the upper
frame adjacent to the control panel. It should be in the OFFposition
to start. Rotating it to the right (clockwise) will start your speed.
ATTENTION:
DO NOT use these functions when the caddy is close to water or other hazards!
