7
ASSEMBLY INSTRUCTIONS
(Continued)
4. Insert Anti-tip Wheel into frame holding bar and secure
with pin.
5. Place the battery pack on the battery tray and tightly
fasten the Velcro strap around the battery. Insert the
3-prong battery plug into the caddy outlet so the notch
aligns properly. It is recommended that you DO NOT
fasten the screw on the plug to the outlet, so in case of
tipover, the cable can unplug from the socket.
NOTE: Before connecting make sure that the speed
control dial (rheostat) on handle is in OFF position!
6. Attach optional accessories, such as Scorecard/Beverage/Umbrella holder, below the
handle. Instructions provided separately.
X3R Only
7. Unpack remote control and install batteries with plus and minus
poles as indicated in the diagram in the receiver compartment
of the unit.
X3R only
