DUP DUP
dual vc. foot switch
+5V
+5V
A
D
P
B
MANUAL
H
W
C
T
I
S
N
U
O
T
T
B
INVERTING GATE IN
SIGNAL IN
FX SEND
FX RETURN
SIGNAL OUT
FOOT SWITCH
Dup Dup
Dup Dup is dual channel footswitch controller and voltage
controlled switch. Dup Dup adds stomp box type control
to your modular! Use floor switches to bypass signal
processors, switch between any two signals, mute trigger
sequences for your drum voice or just send a gate signal!
It can be used in either momentary or switch mode. Works
with any button, but with the ones we provide it also gives
you visual indication (led) on the floor. It can be also used
as a simple voltage controlled switch.
Each of the Dup Dup channels
A and B have:
1
Foot switch input to connect stomp button or any other
pedal (such as sustain pedal) to change the state of the
switch.
2
Led indicating the state of each switch.
3
Button to manually trigger the switch.
4
Switch selector that determines how the button
is interpreted. The “button” position refers to the
momentary mode: while the button is pressed the switch
is on. The “switch” position refers to the latch mode: at
each press of the button the state of the switch is flipped.
In other words you press the button once to turn switch
on and second time to turn it off.
5
Signal input for the VC switch.
features
•
dual voltage controlled switch
•
2 foot-pedal inputs
( stereo connectors: on the ring is power for an LED)
•
each channel has signal IN which is buffered into
the FX Send
•
signal OUT selects between FX Return and Signal IN
•
manual button to change the switch
•
each channel can act as a momentary button
or as a latch switch
•
gate input inverts the current state of the switch
D
U
AL
V
OL
TA
GE
C
ONTR
OLLED
F
O
O
TS
WIT
CH
technical details
•
5HP
•
PTC fuse and diode protected 10 pin power connector
•
55mm deep
•
current: +12: 25mA, -12 5mA
1
6
FX send is a buffered output version of the signal input.
7
Fx Return input is the second signal input for the VC
switch. The FX Return it is normalised to +5V when
nothing is plugged into it, so the output can be used to
send gate signals when no input signals are connected.
8
Signal out is the switched output which either outputs
the signal from Signal Input or from the FX Return.
9
When gate is detected on the inverting gate input the
state of the switch is inverted as long as the gate lasts.
2
3
4
5
8
9
6
7
