9/26/2018
Thyme Manual
https://bastl-instruments.github.io/thyme/manual.html#/Introduction
21/48
Set Robot Polarity
You can set the polarity of the selected Robot by holding down
ROBOT SELECT
and
pressing one of the buttons
FREEZE
/
LINK
/
SYNC
. While
ROBOT SELECT
is being
pressed, the current polarity is indicated by an LED.
Robot Phase
When activating a Sound, all Robots are setup according to the settings stored for this
particular Sound. Robots set to oscillator-type Modes also reset their outputs. Usually, they
are set to zero, so - for example in triangular Mode - the modulation is off at the very rst
moment and rises. This starting point can also be set to three other positions.
13
