All buttons are touch configuration
On / Off button
Power select button
heating
* When both are on they are at full power
WIFI switch
Ÿ
Plug the appliance to AC220-240V
50-60Hz socket, it is in standby status
with LED screen displays.
To start the heater, press the standby button.
Turn and directly to set target temperature
from 5~35ºC, when the setting temperature
is 5ºC, press again, the screen will display
the heater will working in anti-frost mode,
the target temp is fixed as 7ºC.
To set the power, press power setting button
to select the power from Low position, medium
position and high position in a cycle by every press.
Low position is represented illuminated “ ” indicator;
medium position is represented illuminated “ ”
indicator, high position is represented illuminated
“ ” and “ ” indicator together.
To set the timer press and press + and - to select
from 0 to 24 hours. Press again to end the function
and return to display the temperature.
To check the remaining time, press once
the timer will flash and the display will show
the remaining hour for 3 seconds, then continue
showing the temperature.
Ÿ
-
Ÿ
-
+
Ÿ
Ÿ
You can also visit
www.tuya.com
for more
information. Please note
Tuya
are constantly
developing and upgrading their Apps to make
them more user friendly and sometimes,
displays may differ slightly to the display
shown in this manual due to upgrades.
Select your country code, enter your mobile
number and select “Get” to receive a message
containing your verification code. Enter your
verification code and select “Login”.When the
first using to turn on the heater, the WiFi
indicator light will flash, connect it in the APP.
Reset the WiFi, press wifi button for 3 secs,
the item will “beep”, the WiFi indicator light
will flash rapidly, you can now connect within
the APP.
Ÿ
Ÿ
Ÿ
Time Indicator
Wifi indicator
Instructions for use
Half power indicator
Press the time indicator
Temperature rise and timer
Temperature reduction and timer
Low power indicator
