background image

9/11/2014

Page 4 of 16

CAUTION: 

ANY MATTRESS USED IN

THIS CRIB MUST BE AT LEAST 27-1/4 
INCHES BY 51-5/8 INCHES WITH A 
THICKNESS NOT EXCEEDING 6 INCHES.
THE MINIMUM MATTRESS THICKNESS 
IS 4 INCHES.

IMPORTANT SAFETY INFORMATION FOR FULL SIZE CRIBS AND TODDLER BEDS

Do not use this crib if you cannot exactly follow the accompanying 
instructions.

Do not use this crib for a child who can climb out of it or who is 
taller than 90 cm. 

Do not place in or near this crib any cord, strap, or similar item that 
could become wrapped around a child's neck.

Do not place this crib near a window or a patio door where a child 
could reach the cord of a blind or curtain and be strangled.

Ensure that the sides of this crib are properly latched or locked in 
the appropriate position when a child is left unattended in it.

Check this crib regularly before using it and do not use it if any 
parts are loose or missing or if there are any signs of damage. Do 
not substitute parts. Contact the manufacturer if replacement parts 
or additional instructions are needed.

Use a crib mattress that is no thicker than 15 cm and is of such a 
size that, when it is pushed firmly against any side of the crib, it 
does not leave a gap of more than 3 cm between the mattress and 
any part of the sides of the crib.

Children can suffocate on soft bedding. Do not place pillows, 
comforters, or soft mattresses in this crib.

Caregivers must ensure that the crib is safe by checking regularly, 
before placing the child in it, that every part is properly and 
securely in place.

WARNING:

Summary of Contents for 5525-0521

















Reviews: