9/11/2014
Page 16 of 16
STEP #7
FULL SIZE BED ASSEMBLY
Full size bed rails (x 1 pair)
Sold Separately
•From the crib, detach all bolts from the footboard, then
detach all bolts from the headboard. Remove the (8)
pre-installed filler bolts from the bed rail bushing
locations on the headboard and footboard. To attach
bed rail to posts, insert (2) machine bolts with lock
washer & flat washer through holes in side rails into
bushings in headboard and tighten with Allen wrench
(II). Repeat this procedure on all four areas for proper
full-size bed hook-up. Assemble the leg supports to the
bottom of the slats. Secure the slats to the slat bearer
rail with the wood screws provided.
•
NOTE:
A Hollywood metal bed frame
(Sold
Separately)
may used with the headboard to create a
full size bed.
Hardware needed for Step #7:
(AA) Allen wrench (1 piece)
(DD) 5/8 in. bolts (x 4 pieces)
(EE) 2-3/4 in. bolts (x 8 pieces)
(FF) 5/8 in. flat washer (x 8 pieces)
(GG) 1/2 in. lock washer (x 8 pieces)
(HH) 1-1/4 in. wood screws (x 6 pieces)
(II) Allen wrench (1 piece)
DD
DD
Slat
Leg support
FF
GG
Detail A
•
IMPORTANT:
Store away all
extra parts to this “crib”, “toddler
bed”, that you are not using for
possible future use, as you may
wish to convert again. Always
store the assembly directions in
the pouch attached to the
mattress support.
Bed rail
Bed rail
DD
DD
EE
HH
Holes for Hollywood
bed frame hookup
