Basler Vision Technologies A202k, User Manual

Page: 113 / 118

Revision History
BASLER A202
k
i
DRAFT
Revision History
Doc. ID Number Date Changes
DA 044001 3 July 2001 Initial release covering prototype cameras only.
DA 044002 26 October 2001 Initial release covering series production cameras.
DA044003 04 March 2002 Update to camera version 1.01:
Changed the minimum high time for the ExSync signal from 1 µs
to 4 µs. (Sect.
2.4.1 , for example)
Changed the exposure time offset to 94.5 µs. (Sect. 3.2 )
Changed the minimum setting for Timer 1 from 10 µs to 6 µs.
(Sections
3.2.1.3 , 3.2.2.1 , 4.2.4.3 , 6.2.1 )
Changed the decimal setting for 0 dB from 237 to 288.
(Sections
3.5.1 , 3.5.2.1 , 4.2.4.10 , 4.2.4.12 )
Changed the corresponding equations. (Sections 3.5.1 and 3.5.2 )
Simplified the No Image troubleshooting chart (Section 6.2.1 ).
Added more frame grabber configuration file formats to Sect. 6.2.3 .
DA044004 08-November-2002 Update to camera version 1.02:
Changed the low time between the last two lines from 25 ns to 7.9 µs
in the timing diagrams on pages
2-11 and 2-12 .
Described the Camera Temperature feature (page 3-36 ).
Updated from the Classic Camera Configuration Tool to the Camera
Configuration Tool Plus (page
4-2 ).
Corrected the possible range of Timer 2 settings on page 4-13 .
Added the Mirror Image binary command on page 4-20 .
Revised the troubleshooting diagram on page 6-2 .
DA044005 12 May 2003 Update to FPGA firmware version 1.05:
Updated Figures 2-4 and 2-5 .
Updated the timing numbers on pages 3-5 through 3-9 and on
page 3-11 .
Updated the frame rate formulas on page 3-27 and 3-31 .
Updated the Timer 1 range on page 4-13 .
Updated the timing numbers shown in the “No Image” trouble-
shooting guide in Section
6 .
DA044006 22 July 2004 Update to include A102kc color cameras:
Updated Table 1-1 and added Figure 1-2 .
Added Section 3.10 to describe color creation.
Added Section 5.5 to describe maximum thread length.
Updated troubleshooting table in Section 6.2.2 to include color
cameras.
DA044007 9 March 2005 Updated the gain range stated in Sections 3.5.1 , 3.5.2.1 , 4.2.4.10
and 4.2.4.12 .
Updated the digital shift descriptions in Section 3.6 .
Updated the available digital shift settings stated in Section 4.2.4.5 .