basIP 5060514913826, User Manual

Page: 3 / 12

3
Eng
Completness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need::
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a network
switch
/ router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps , if there is no PoE .
Wires must be brought for the connection of alarm loops and home
automation (optional).
You can connect any type of electromechanical or electromagnetic lock for which the switched current
does not exceed 5 Amps.
Outdoor panel
Manual
Flush mounting bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
Wrench set screws
Power Peripheral Interface LAN (PoE)
RJ45
DC12V
+12V GND 485+ 485- NC COM NO EXIT DS DIN
SH-45 Door Sensor
Exit Button
GND
+12V
SH-42
(optional)
Connection scheme of electromechanical lock
using external power supply for panel and the lock.
+12V
DC
+
-
+12V
DC
+
-
Connection scheme of electromagnetic lock
using external power supply for panel and the lock.
+12V
DC
+
-
+12V
DC
+
-
P ower supply
for the panel
P ower supply
for the lock
P ower supply
for the lock
P ower supply
for the panel
Electromechanical
lock
Electromagnetic
Lock
Power Peripheral Interface LAN (PoE)
RJ45
DC12V
+12V GND 485+ 485- NC COM NO EXIT DS DIN
SH-45 Door Sensor
Exit Button
GND
+12V
SH-42
(optional)