Electric Plate Warmer
H904
Instructions for Use
Please read and retain these instructions for future reference
v001: 26/04/21
•
Wash the cover in warm (max.40
℃
) water and mild detergent, rinse and dry thoroughly. Make sure the
cover is completely dry before reuse.
WARNING!
Only the textile cover can be washed. Never immerse the complete Plate Warmer in water or other liquid
for cleaning.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 3-amp plug. If you have to replace the fuse, only those that are ASTA
or BSI approved to BS1362 and with a rated current of 3-amps should be used. If there is a fuse cover fitted,
this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be
used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or
office are not suitable for this product’s plug, the plug must be removed and di
sposed of safely. Attempts to
insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
BLUE
NEUTRAL
BROWN
LIVE
GREEN & YELLOW
EARTH
The diagram shows the key features of a correctly wired
three-pin mains plug.
DISPOSAL
•
Coopers of Stortford use recyclable or recycled packaging where possible.
•
Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•
At the end of the product’s lifespan please check with your local council authorised household waste
recycling centre for disposal.
