Soup Maker
H670
Instructions for Use
Please read and retain these instructions for future reference
v001: 05/03/21
Note: For tough stains, it is recommended to leave the hot water in the Electric Soup Maker for
approximately 10-
15 minutes before using the ‘Blend’ programme .
Caution: The blades under the lid are not removable and are very sharp; extreme caution should be
taken when cleaning the inside of the lid.
Storage
Before storing, ensure that the Electric Soup Maker is cool, clean and dry.
Never store the Electric Soup Maker Whilst it is wet.
Never wrap the cord tightly around the Electric Soup Maker; wrap it loosely to avoid causing damage.
Store in a cool, dry place.
Troubleshooting
Problem Solution
The Electric Soup Maker is not working and is
beeping.
The liquid level is too high.
The Electric Soup Maker has stopped mid
programme.
The lid is loose./The liquid level is too high or the
Electric Soup Maker has been overfilled.
The ingredient pieces are still too large after the
‘Smooth’ soup programme has completed.
The pieces may have been too big initially;
Use the ‘Blend or Pulse’ programme after the
cooking programme .
The ingredients are hard after the cooking
programme has completed.
Chop the ingredients into small pieces before
adding to the Electric Soup Maker.
The wrong soup programme has been used for the
volume added.
The Blend mode is not working.
The Blend programme will automatically stop after
2:30mins of continuous operation.
Note: Always allow the Electric Soup Maker to cool
sufficiently after 1 minute of successive blending
operation.
The Electric Soup Maker is not switching on or an
audible sound is heard. (warning sign E)
Check and clean the overfill sensor.
Food deposits are hard on the base after the soup
has been made.
Follow the ‘Cleaning and Maintenance’ section to
remove deposits.
