Parameter Programming
6
- Changing
Point Position
value
reflects on the real value
of all parameters
with ISU!
E.g.: changing
Point Position
value
from (0) to (0.0)
would change
a Set-point value
of 100 to 10.0!!!
Setting numerical parameter value
♦
Enter parameter value adjustment mode
(see '
Program Levels
').
♦
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
♦
To select another digit, press
.
♦
The 3 rightmost digits can accept values
from
0
to
9
, and the leftmost digit
can also accept the values
-
and
`
.
♦
To increase or decrease the blinking digit
value, use respectively
or
.
♦
Confirm the adjusted value by pressing
simultaneously
+
or
+
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
♦
In parameter value adjustment mode,
use
or
to change the value,
and to confirm, press
+
or
+
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting color
♦
Enter
Bargraph Color
parameter value
adjustment mode.
♦
Each of the bargraph LEDs lights in its
designated color, and the lowermost blinks.
♦
To select other LED, use
.
♦
To change the LED color, use
or
.
♦
To cease the adjustment, press
+
or
+
or just wait awhile.
