18
F
G
10
Join the 2 rope clamp sides
with the longer alignment
screws. If the holes are not
exactly aligned, the connector
body can be moved from side
to side to allow the screws to
be inserted. [F]
11
Tighten the alignment screws,
alternating sides until the 2
sides are flush and the screws
are snug.
12
Insert and tighten the grip
screws by alternating the sides
and location on both sides of the
connector clamp. The screws
must be tightened until they are
fully counter-sunk and are flush
with the body. If using a cordless
screwdriver, we suggest the
clutch be set mid-range. [G]
13
Inspect to verify all components
and the finished assembly for
proper orientation of clamp/
connector. Return to service.
Summary of Contents for PATRIOT 76PAT
Page 3: ...3 A E B F C D H G I J...
