• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and Operation
• The product‘s design complies with protection class I. Only an earthed mains
socket connected to the public power supply may be used as power supply to
the product.
• The mains socket into which the LED mains outlet dimmer adapter is plugged
must be easily accessible.
• The LED mains outlet dimmer adapter is equipped with a child safety device. Only
when the pins of the power plug are placed in both openings of the front socket at
the same time will the child-lock mechanism release the opening.
Nevertheless, take special caution when children are around. Children cannot rec-
ognise the danger arising from the incorrect use of electrical devices. There is a
risk of a life-threatening electric shock!
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet! Never place
the product in direct vicinity of a bathroom, shower, bathtub or the like. Lethal
hazard due to electric shock!
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Never operate the LED mains outlet dimmer adapter in a vehicle.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that forms might destroy the device. Moreover, there is danger of electric
shock! Allow the product to reach room temperature. Wait until the condensation
has evaporated. This might take several hours. Only after this should the product
be plugged into the power supply and put into use.
• Never pull out a mains plug that is plugged into the LED mains outlet dimmer
adapter by pulling on its cable. Always pull the plug out of the front socket by grip-
ping the area provided for this purpose on its sides.
• Do not overload the LED mains outlet dimmer adapter. Observe the power rating
in the chapter “Technical Data”.
• Always unplug the LED mains outlet dimmer adapter from the mains socket before
cleaning it or when the device is not being used for a long time.
• Never pour any liquids above or next to the product. You run the risk of causing a
fire or a fatal electric shock.
However, if liquid has entered the device, immediately turn off the power supply to
the mains socket to which the LED mains outlet dimmer adapter is connected (turn
off the fuse / circuit breaker / residual current operated circuit breaker of the as-
sociated circuits). Only then can you unplug the LED mains outlet dimmer adapter
from the mains socket and contact a specialist. Do not use the product any longer.
• Do not connect in series! This can lead to overloading of the LED mains outlet
dimmer adapter! There is a risk of fire!
• Do not operate while covered! At higher connected loads, the LED mains outlet
dimmer adapter will get hot, which may lead to overheating posing a risk of fire,
if it is covered!
• Voltage-free only, if the plug is unplugged!
• If the LED mains outlet dimmer adapter is damaged, do not touch it; there is a
danger to life from electric shock!
First, switch off the mains voltage to the socket, to which the LED mains outlet
dimmer adapter is connected (switch off at the corresponding circuit breaker or
remove the safety fuse or switch off at the corresponding RCD protective switch,
so that all poles of the mains socket are disconnected).
Then you can remove the LED mains outlet dimmer adapter from the mains sock-
et. Do not use a damaged LED mains outlet dimmer adapter any more, dispose of
it in an environmentally friendly way.
Operating instructions
LED mains outlet dimmer adapter
Item no. 1529336
Intended use
The product features an electrical outlet to connect a suitable lamp which can be dimmed. The
lamp’s brightness is infinitely adjusted with a large control knob, and used to turn the light on
and off.
The product is only intended for use in dry indoor locations.
The product must be connected to a mains socket with earth contact. See chapter “Technical
Data” for information on connection, minimum load, and the maximum permissible power con-
sumption of the connected electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, you may inflict damage on it. Further
-
more, improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• LED mains outlet dimmer adapter
• Sticker set (type plates)
• Operating instructions
Latest Operating Instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code as shown. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specific tips and information on the operation are
provided.
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
