Operating elements
1
2
3
4
1 Outlet socket (switchable)
2 Indicator lamp
3 Outlet socket (switched on permanently)
4 Foot switch
Installation
Do not bend or squash power cables. Doing so may cause malfunction, short-circuit
or damage to the product. Make sure not to damage any cables or power wiring
when drilling holes in the wall or screw mounting to predrilled holes.
When choosing an installation site, take into consideration that the power strip may
only be installed to a flat, non-flammable and dry surface.
There are 2 screw holes on the bottom. Mount the power strip using suitable fastening material
to a secure and even surface (i.e. a wall) as needed.
Operation
Make sure that the power strip is voltage-free before connecting devices.
• Plug in up to 5 devices to the power strip outlets.
• Plug the power strip plug to your mains outlet.
• Then switch on the outlet socket strip by pressing the foot switch. When switched on, one of
the blue control lights each in the foot switch and on the outlet socket strip lights up.
The foot switch will activate or deactivate all 4 adjoining outlet sockets simultaneously.
The single outlet socket remains switched on permanently and independent from
the foot switch.
Maintenance and cleaning
• This product does not require maintenance. There are no components located inside the
product you need to maintain. Never open/dismantle the product. Have maintenance and
repairs done by qualified experts or repair shops only.
• Always disconnect the product from the mains before cleaning. Then disconnect all connected
devices from the power strip.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-haired, soft
and clean brush and a vacuum cleaner to remove dust.
• Never use any aggressive cleaning agents or chemical solutions as they may cause damage
to the housing or cause the product to malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Connection data ...................................240 V/AC, 50 Hz
Total power input ..................................max. 3680 W (16 A)
Inductive load .......................................max. 3 A
Cable length .........................................2 x 1.5 m
Operating conditions .............................0 to +40 °C, 0 – 85 % RH
Storage conditions ................................-10 to +50 °C, 0 – 55 % RH
Dimensions (L x W x H) ........................360 x 56 x 42 mm
Weight ..................................................635 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V2_0716_02-ETS-Mkd
