• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The power strip is equipped with a child safety device. The device will only
release the socket openings, if both pins of a plug are inserted into the socket
simultaneously. Still exercise caution when using the product in the vicinity of
children. Children do not realize the dangers which can arise from incorrect
handling of electrical devices. This poses a risk of fatal electric shock!
• Only use a properly installed mains outlet of the public power supply (230 V/AC,
50 Hz) as a power source.
• The mains outlet must be located near to the device and be easily accessible.
• Unwrap the power cable fully during use. The power cable may not be squashed
or damaged on sharp edges. Do not place any objects on the cable and do not
step on the cable. Lay the cable so that no one can accidentally trip over it and so
that the plug is easily accessible. Do not lay the cable under rugs, etc.
• Never touch, use, plug in or unplug the product with moist or wet hands. This
poses a risk of fatal electric shock!
• Never connect the product to the mains directly after moving it from a cold to
a warm room (i.e. during transportation). This may cause condensation, which
can destroy the device or lead to electric shock. Let the product first reach room
temperature. Wait until the condensation has evaporated. This can take a few
hours. Only now may the product be connected to the power supply and operated.
• Only unplug a power plug by pulling on the provided grips, never pull on the power
cable to unplug the device.
• Do not overload the power strip. Heed the power rating in the chapter „Technical
data“.
• Do not connect the product in series! This may overload the power strip. This
poses a fire hazard! Connect the power strip‘s safety plug directly to a wall socket.
Do not connect any more power strips to the product.
• Do not operate the power strip covered! The higher the connected load, the more
the power strip and power cable will warm up, which can cause overheating and
possibly a fire if the product is covered.
• The power strip is voltage-free only once it is unplugged.
• Unplug the product under the following conditions:
- before cleaning the product
- in case of a storm
- for extended periods of disuse.
• Never pour liquids above or near the product. This poses a great risk of fire or
fatal injury due to electric shock. Should any liquid enter the device interior, turn
off the power socket to which the power strip is connected entirely (fuse/automatic
circuit breaker/residual current-operated device). Now unplug the power strip and
contact a professional. Discontinue use of the product.
• Do not place any objects on or in the direct vicinity of the power strip.
• In industrial facilities, heed all applicable accident prevention regulations for
electrical installations and equipment.
• The use of electrical devices must be supervised by trained staff in schools,
training centers, hobby and do-it-yourself workshops.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating instructions
Version 07/16
5-outlet socket strip with foot switch
Item no. 1417344
Intended use
Use this product to connect 5 electrical devices. The product features a foot switch with built-in
control light, that allows for the connected appliances to be switched on or off simultaneously.
One of the outlet sockets remains switched on permanently and independent from the foot
switch. The built-in child safety device affords extra safety. The total power consumption of all
connected devices may not exceed 3680 W.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power strip
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Explanation of symbols
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates specific risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
