The lower voltage of rechargeable batteries (rechargeable battery = 1.2 V,
battery = 1.5 V) and the lower capacity result in a shorter operating time compared
to normal batteries. A decrease in operating range might also be likely.
For that reason we recommend you using high-quality alkaline batteries in order to
guarantee long and safe operation.
Use dark-colored pads as mouse pad. Lighter pads cause higher battery use.
c) Using the mouse
• Switch on your computer.
Switch on the mouse by sliding the ON OFF switch (2) to ON position.
• Both the transmitter and receiver will connect automatically via 2.4 GHz radio technology.
After the connection has been established, the operating system will install the required
driver. A pop-up message will indicate the successful installation.
• You may now operate your computer by pressing the mouse buttons or using the scroll
wheel (1).
• After use, disconnect the receiver from the USB port on your computer and store it away
in the storage compartment of the mouse. Slide the ON OFF on/off switch (2) to the OFF
position in order to save battery power.
The optical sensor on the bottom of the mouse might not operate properly on some
surfaces, such as transparent, smooth, shiny, reflecting or reflective surfaces. In
such cases, use a suitable mouse pad.
Other strong transmitters in the proximity of the mouse can cause radio interference.
Remove such transmitters. The ideal distance between receiver and mouse is
20 cm.
Keep the mouse and the receiver away from metal surfaces. Those will divert the
radio signals.
d) Establishing a radio connection manually
If radio reception is interfered with, establish the connection manually. When doing so, the
distance between mouse and receiver must not exceed 10 cm.
• Switch off the mouse by sliding the ON OFF switch (2) to OFF position.
• Briefly disconnect the receiver from the USB port on your computer and then reconnect it
again.
• Switch on the mouse by sliding the ON OFF switch (2) to ON position.
• Press the two mouse buttons and the scroll wheel simultaneously. Release all controls after
approx. 6 seconds.
Or press the right mouse button and the scroll wheel at the same time. Release all controls
after approx. 10 seconds.
• The connection has then been established.
e) Sleep mode
• Not operating the buttons or the scroll wheel of the mouse for approx. 15 minutes will
cause the mouse to activate its sleep mode. The LED will turn off. Current consumption will
decrease to ≤ 0.02 mA.
• To activate the mouse use any mouse key or the scroll wheel.
Maintenance and cleaning
• Never submerge the product in water.
• Apart from replacing batteries, the product is maintenance-free. To clean the product, use a
soft, anti-static and lint-free cloth.
• Never use aggressive or abrasive cleaning agents, rubbing alcohol or other chemical
solvents, as those can damage the housing or even affect the operation of the product.
• Check the optical sensor from time to time. Remove any dust particles using a soft brush.
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that
this product conforms to the fundamental requirements and the other relevant regulations of
the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries.
Disposing of them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon
on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Voltage supply ......................................2 x 1.5 V batteries, type AAA
Radio frequency ...................................2.4 GHz
Number of radio channels ....................16
Sensor resolution ..................................1000 dpi
Current consumption ............................≤10 mA (in active mode)
≤0,02 mA (im sleep mode)
System requirements ............................Windows
®
XP (Home, Pro with SP1, SP2, SP3),
only 32 bits, Vista™(32/64 bits), 7 (32/64 bits),
8.0 (32/64 bits), 8.1 (32/64 bits), 10 (32/64 bits), RT
Range ...................................................max. 10 m (in open area)
Operating condition ..............................0 to +40ºC, 0 – 95 % RH
Storage conditions ................................-40 to +55ºC, 0 – 95 % RH
Dimensions (W x H x D) .......................104 x 38 x 58 mm
Weight ..................................................55 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V1_0216_02-LS
