DIGITAL INCLINOMETER
EASY TO USE
Range-of-motion can be read directly after the joint has been taken through its range.
Place inclinometer near the joint to be measured; set the “
alternate zero
”; move joint
through its range; press the “
hold
” button. Read range-of-motion.
Digital Inclinometer Operating Instructions
12-1057
ver 03/14
Fabrication Enterprises, Inc.
PO Box 1500
White Plains, NY 10602 (USA)
tel: +1-914-345-9300
fax: +1-914-345-9800
www.FabEnt.com
FEI
Authorized CE representative
RMS UK Ltd.
28 Trinity Road
Nailse, Somerset BS48 4NU (UK)
© 2014 FEI, all rights reserved
Baseline® is a registered trademark of Goldberg
