Remote control
● 3D printed relay case (top & bottom)
● Heltec ESP32 LoRa V2
● 3.7V 680mAh LiPo battery
● Sliding switch 7 x 13mm
Tools
● Phillips screwdriver
● Drill with 1/16” and 1/4" bits
● Super glue (cyanoacrylate)
● Soldering kit
● LiFePO4 battery charger
● 3D printer
Cost
If you have all the necessary tools, it’s pretty easy to assemble a ParaDrone for under $250
USD. The majority of the cost is:
uxcell 12V DC 200RPM Gear Box Motor (x2)
$40.00
Pololu Dual MC33926 Motor Driver Carrier
$30.00
Heltec ESP32 LoRa V2
$23.00
4x LiFePO4 3.2V 650mAh AA battery
$16.00
Beitian BN-180 GPS
$15.00
Pololu S9V11F5 Voltage Regulator
$6.00
Motors
1. Use pattern in Appendix A to drill mounting holes in the board.
11
