12
866 294 5847 | baselinesystems.com | [email protected]
BASELINE CLOUD NETWORK MODULE
Plug the 5-pin connector from the Cloud
Network power cord into Comm 2 connector
on the right end of the controller board.
Note:
If another connector is attached to the
upper 5-pin terminal block, disconnect it and
then reconnect it to the Comm 2 connector.
12
Installing the Cloud Network Module into a Pedestal Cabinet, Cont.
Reconnect the orange power connector to
the board in order to restore power to the
controller.
13
14
1. For Ethernet connections, attach the cable
to the port on the Cloud Network Module
as shown.
