ME9000LH-17/25 EXCELA-WYND
™
HOSE REEL (Patent Pending)
INSTALLATION AND OPERATING INSTRUCTIONS
Form #1176, Excela-Wynd™ Hose Reel IOM
Page | 2
Rev B
12/1/21
INSTALLING REEL
Unboxing
- See 1176-UB unboxing instructions located on the shipping box or see “Unboxing” section in the Appendix.
Locating Reel on Deck -
MEC recommends using the ME9000LH-17/25-DJ Drill and Piping Jig to properly position the reel on the
deck and allow piping to be fabricated prior to mounting the reel.
49 CFR Section 178.345-8
Accident Damage Protection
requires that a
ny part of the cargo tank motor vehicle which
contains lading during transit must be at least 6 inches horizontally forward of the vertical plane of the outboard surface of
the protection device (bumper).
To assure compliance and proper operation
, the ME9000LH-17/25 Excela-Wynd hose reel must be positioned on the deck
and installed according to these instructions.
Installation inconsistent with these instructions may cause damage to the
hose or hose reel and may void warranty.
