ME9000LH-17/25 EXCELA-WYND
™
HOSE REEL (Patent Pending)
INSTALLATION AND OPERATING INSTRUCTIONS
Form #1176, Excela-Wynd™ Hose Reel IOM
Page | 1
Rev B
12/1/21
BEFORE INSTALLING THE EXCELA-WYND HOSE REEL PLEASE READ THESE IMPORTANT INSTRUCTIONS
1.
Place the laminated, tri-folded Excela-Wynd operating instructions (Form 1176-OP) from the ACCESSORIES BOX in the delivery truck
where it will be available to the driver, such as in the equipment binder or glove box.
2.
The ME9000LH-17/25 Excela-Wynd hose reel must always be powered by a BASE Engineering VSC9000 variable speed controller.
3.
A flexible connection must always be installed between fixed piping and the reel inlet.
4.
To prevent damage to reel and reduce risk of injury, do not stack hose reels during transportation or storage.
5.
The reel must be lifted as shown in the “Lifting and Setting” section of these instructions.
6.
An anti-seize compound must be applied to the external threads of all fasteners when installing or servicing the hose reel. MEC
recommends using a Nickle-based (copper-free) anti-seize compound.
7.
Use only Ø1” ID hose on the ME9000LH-17/25 Excela-Wynd hose reel.
8.
Installation or service inconsistent with these instructions may damage the reel, increase the risk of injury or void the warranty.
BEFORE SERVICING THE EXCELA-WYND
™
HOSE REEL PLEASE READ THESE IMPORTANT SAFETY WARNINGS
WARNING!
Risk of injury from
pinch points
– Keep hands and
fingers away from hose guide.
WARNING!
Risk of injury from
pinch points
– Do Not operate hose
reel without guards in place.
WARNING!
Risk of injury from
pinch / sever points
– Keep
fingers away from inlet flange.
WARNING!
This product contains a
chemical known to the state of
California to cause cancer and birth
defects or reproductive harm.
CONTENTS
INSTALLING REEL ………………………………………..… Page
Unboxing ……………………………………………………………
Locating Reel on Deck …………………..………………......
Lifting and Setting ……………………………………………...
Mounting to Deck …………………………………………..….
Connecting Inlet …………………………………………………
VSC9000 SPEED CONTROLLER ……………………………….
Enclosure ……………………………………………………………
Power …………………………………………………………………
Motor …………………………………………………………………
Sensor ……………………………………………………………..…
Test Mode ………………………………………………………….
CONFIGURING VSC9000 CONTROLLER .....................
Setting Hose Length ..............................................
Setting Hose Speed ...............................................
INSTALLING HOSE ...................................................
Removing / Replacing Optional Cover ..................
Connecting Hose to Riser ......................................
Installing Hose in Guide ........................................
Connecting Riser to Inlet Flange ...........................
Adjusting Carriage ................................................
Loading Hose ........................................................
2
2
2
3
3
3
4
4
4
4
4
4
5
5
5
5
5
6
6
7
7
8
SPECIFICATIONS ……….………………………………. Page
MATERIALS OF CONSTRUCTION ...........................
WARRANTY …………………………………………….………….
APPENDIX ………………………………………………............
Unboxing Instructions ……………………………………..
Controller Configuration Diagram ……………….…..
Operating Instructions ……………………………….…...
9
9
10
12
12
13
14
