Installation Manual
FIBONACCI RS485
©
202
1
bas
alt
e v1.1
basalte
bv
| hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | [email protected]
Technical data
Current consumption:
Peak during startup: 1 W
During operation: 0,5 W
Ambient temperature:
Operations between 5 & 45°C
Storage & Transport between 15 & 55°C
Max. humidity:
93% relative humidity - no moisture condensation
Protection Class:
II
Type of protection:
IP20
Certification:
CE
Installation
1. Rough-In
Use a standard 1-gang US wall box or a standard European back box.
The included mounting bracket should be mounted on the wall using the included screws.
2. Installing Fibonacci on the wall
Position Fibonacci for portrait mounting, align the mounting bracket
hooks with the Fibonacci mounting slots and gently press it towards
the mounting bracket/wall. Fibonacci snaps in when pushed to its
mounting bracket.
Powering up Fibonacci
Connect the 4 colored strands to the RS485 bus cable in accordance
to standard RS485 guidelines.
Please refer to the software manual to configure Fibonacci.
Removing Fibonacci
Follow the step 1 and 2 in order to remove Fibonacci from the wall.
1
2
Single-gang box
Mounting
bracket
Dry wall
Push
Pull
a 60 mm (2,36”)
b 84,5 mm (3.33”)
a
b
Only use the openings on the vertical axis as shown on the picture.
Don’t screw on the mounting bracket too hard, to avoid bending. This would hinder
proper snapping-in of the keypad.
