Auro Cresnet
Manual
7
/
13
v1.0
© 2017 basalte
5.
Programming in SIMPL Windows
5.1
Adding a Basalte Auro motion sensor
A Basalte Auro motion sensor is added to the Cresnet Bus like any other Cresnet device, using the
Configure System
window.
You can select the Basalte Auro from the
‘
Cresnet Control Modules / Cresnet Sensing Modules’
folder in the
Device Library
on the left pane, and drag it to the
processor’s
Cresnet Bus on the
upper right pane.
The Basalte Auro motion sensor will be appended to the (if any) already existing Cresnet Devices.
To change the Cresnet ID of the Basalte Auro motion sensor, you can right-click the desired Auro
and press the
Configure
button. The
Net ID
tab on the new pop-up-window allows you to select
another Cresnet ID.
Another way of adding the Basalte Auro motion sensor to the Cresnet Bus is by using the
Device
tree
in the lower right pane.
Right click on the desired Cresnet ID and press the
Add item to ...
button. A new pop-up window
will allow you to select the Basalte Auro motion sensor from the available Cresnet devices.
