BAS-IP 5060514912485, User Manual

Page: 3 / 12

3
Eng
Completness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
Outdoor panel
Manual
Flush mount bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of plugs for connections
Wrench set screws
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need::
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a network
switch
/ router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps , if there is no PoE .
Wires must be brought for the connection of alarm loops and home
automation (optional).
Connection scheme of electromechanical lock
using external power supply for panel and the lock.
You can connect any type of electromechanical or electromagnetic lock for which the switched current
does not exceed 5 Amps.
Connection scheme of electromagnetic lock
using external power supply for panel and the lock.
+12V GND NC COM NO
485-
485+
DS
DIN
GND
EXIT
+12V
DC
+
-
+12V
DC
+
-
SH-45
Exit Button
GND
+12V
LAN (PoE)
Electromechanical
lock
P ower supply
for the panel
P ower supply
for the lock
+12V
DC
+
-
+12V
DC
+
-
SH-45
Exit Button
GND
+12V
P ower supply
for the panel
P ower supply
for the lock
Electromagnetic Lock
+12V GND NC COM NO
485-
485+
DS
DIN
GND
EXIT
LAN (PoE)