Installation and operation
12 / 19
100083
EN
Control Panel
Control Panel
1. Water tank indicator light
2. Storage container indicator light
3. ON/OFF switch indicator light
4. ON/OFF switch
Start-up
1. Connect the appliance to a single grounded socket.
2. Turn the appliance on with the ON/OFF switch.
The ice cubes production process is started. Depending on the ambient
temperature, the production cycle lasts approx. 15
–20 minutes.
3. To change the size of the ice cubes, press and hold the ON/OFF switch for 5
seconds.
The ice cubes production cycle is approx. 3 minutes longer and thus the ice cubes
become a little bit thicker.
4. Make sure you check the water level in the bottom tank underneath the storage
container regularly during operation of the appliance.
If there is not enough water to carry out the ice cubes production cycle, the
appliance automatically drains water from the large water tank to the bottom tank to
continue ice cubes production.
If there is not enough water in both bottom and large water tank, the appliance
automatically stops and the 'ADD WATER' indicator light is lit.
5. Switch the appliance off with the ON/OFF switch.
Summary of Contents for W150
Page 1: ...W150 100083...