Installation and operation
14 / 22
A162820E
EN
NOTE!
For safety reasons the appliance operates only when the control box is
properly mounted on the housing, so that the micro-switch below the
control box sets the appliance ready for operation.
5. After cleaning, mount the control box with heating element on the fastening
element of the appliance.
Fat drain tap is equipped with a safeguard, preventing its
accidental opening. First, the tap must be pressed in
—
only then may it be rotated.
6. Prior to filling the tank with frying oil / fat in cubes (blocks) close the fat drain tap.
Instructions of using frying oil or fat in cubes (blocks)
1. Use oil suitable for frying (e.g. vegetable oil, sunflower oil, peanut oil, etc.) or fat
in cubes/blocks only.
Note: Fat in cubes (blocks) should be melted first in a separate container
or in the fryer.
2. Use only oils and fats that are suitable for frying in high temperatures.
3. Never mix different types of oil or fat as their boiling points may vary.
Melting fat in cubes (blocks) in the fryer
1. Remove the basket from the tank.
2. Place the fat in cube (block) directly on the cover of the heating element, so that
it is covered.
In order to switch on the appliance, follow instructions in section
“Switching On“
.
Summary of Contents for SNACK I Plus
Page 1: ... SNACK I Plus A162820E ...
