- 41 -
Adding water
CAUTION! Burn hazard!
During filling of hot tank the released hot steam may
cause burns of hands, arms, and face! Do not remove
the lid during boiling
Rotate the temperature controller counterclockwise to position
.
Before refilling with water leave the device for a few minutes for coling down.
NOTE!
The thermostat will turn the device off when there is no (or too little) water in the
tank. When the
protection against dry operation
is activated, disconnect the
device from the socket and wait for cooling down before refilling.
Operation of drain tap
Pulse mode
Press the drain tap lever down.
The tap will open. To close the
tap release the lever.
Continuous mode
Pull the tap lever completely backwards.
It will be locked in such position.
The tap will open. To close the tap
pull the lever forwards.
Turning the device off
The device is turned off by rotating the temperature controller counterclockwise to
position
. The control light will go off. Disconnect the device from the socket
(pull the plug!).
