- 23 -
5.2 Installation and connection
CAUTION!
Installation and connection of the device should be performed only by qualified
specialist personnel.
Installation
o
Unpack the device and remove all packing material.
o
Put the device in a safe place that can support its weight and is heat-resistant.
o
Never place the device on a flammable surface.
o
Never operate the device near an open flame, electric oven, heater or other source
of heat.
o
Do not place the device near walls or other flammable materials. Maintain a
minimum distance of 20 cm from the sides and 10 cm from the rear.
•
If the device is to be placed directly next to a wall or furniture, they must be resistant
to temperatures of 60 °C. If the wall's structure c ontains any flammable materials, it
must be protected by a heat-resistant layer.
•
Do not put the device in places with high ambient humidity. Excessive moisture can
damage the device.
•
Do not put the device in moist or wet areas.
•
The device can only be used in a well-ventilated area.
•
Never place any heavy objects on the device.
•
Never cover the device's ventilation ducts. Never place towels or cloths on the
device, and never hang any objects on the device.
•
Carefully remove the protective film from the outside of the device to avoid leftover
glue. If any glue remains stuck to the device, remove it using an appropriate solvent.
•
The Salamander should be placed under a fume hood to ensure all aromas and
gases generated during cooking are completely removed.
Summary of Contents for S702
Page 1: ...S702 100529 V1 0313 ...
