Bartscher IW 35 PRO, Instruction Manual

Page: 19 / 22

- 35 -
6.3 Safety instructions for maintenance
o
Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o
In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o
Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
Error
message
Cause Solution
E01
•
Momentary low voltage
(<160V).
•
Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
E02
•
Momentary high voltage
(> 270V).
•
Remove the device from the socket
(pull the plug!). After a few minutes,
reconnect the device to the socket.
E03
•
The device becomes too
hot (e.g. due to blocked
ventilation slots)
•
Parts are damaged (e.g.
transistor).
•
Clear/unblock ventilation slots.
Leave the device for a few minutes
to cool. The device is ready for use
again.
If the error message after cooling
the device still appears on the
display, contact the salesperson.
•
Contact the salesperson.
E05
•
The overheating
protection turns on in the
power module (>
150 °C).
The device turns off.
•
Remove the cookware from the
cooking surface. Leave the device
for a few minutes to cool. The
device is ready for use again.