- 37 -
5. Installation
5.1 Positioning
Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never
place the device on a flammable surface.
Do not
place the device near an open flame, electric oven or other source of heat.
Never
place the device in humid or wet environment.
Do not block or cover the ventilation ducts that allow for air to circulate around the
device. Doing so may lead to overheating of the device.
Keep a distance of at least 5
– 10 cm from flammable walls and other objects.
Do not place the induction plate near other equipment and objects sensitive to
magnetic fields (e.g. radio, television, etc.).
Position the device so that fast disconnection from the power supply is possible when
necessary.
5.2 Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of
compliance!
CAUTION!
Electrical connection may be performed only by the qualified, certified
electrician, according to the valid international, national and national
regulations of the country in which the installation is performed.
