Installation and operation
16 / 40
105862
EN
5. After installation, fix the heating plate to the work surface using 4 bolts at the
bottom side of the heating plate (see Fig. 5). Adjust the position of the bracket to
actual thickness of the worktop table.
Fig. 5
6. Make sure that following the installation the brackets do not touch internal
surfaces of the work top table board (see Fig. 6).
Fig. 6
WARNING!
Underneath the heating plate there are ventilation openings. When installing the
heating plate, make sure they are not obstructed by the worktop table.
Remember that the adhesive binding plastics or wood with furniture must
withstand the temperatures of over 150°C, to prevent the lining from getting
loose.
After installation of the heating plate, make sure that:
– the power cord is freely accessible, not blocked by cupboard doors nor
drawers,
– there is enough inflow of fresh air from outside of the cabinet to the base of
the appliance,
– in the case of appliance's installation over a drawer or a cabinet, there is a
thermo-insulating partition installed under the base,
– the disconnecting device is easily accessible for the user.
Summary of Contents for IKF 72-2Z
Page 1: ...IKF 72 2Z 105862...
