Installation and operation
305066
19 / 26
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• When the electrical connection is established, check that the supply voltage
during appliance operation does not deviate by ±10% from the nominal value
indicated on the rating plate.
• For your own safety, the appliance must be correctly earthed.
• In accordance with current regulations, a multi-pole switch is required for the
installation of the appliance, which must be located between the appliance itself
and the mains voltage, with a contact separation of at least 3 mm per pole. This
switch must be easily accessible.
• The connection cable used is type H07RN-F 3Gx2.5 mm² (305068) or
3Gx1.5 mm² (305067), length of approx. 2.8 metres. If a power cord is replaced,
a cable with the same or better characteristics must be used.
• Replacement of a damaged power cord must be carried out by a qualified
technician.
• The plug must be easily accessible for quick disconnection of the appliance from
the power supply if the need arises.
