background image

 

 

 

- 26 - 

 

 

Read this instruction manual before using and 
keep them available at all times! 

 
This instruction manual contains information about the installation, operation and 
maintenance of the device and should be consulted as an important source of 
information and reference guide. 

Awareness of the safety instructions and instructions for use in this manual will ensure 
the safe and correct use of the device. 

In addition to the information given here, you should comply with any local Health and 
safety Controls and generally applicable safety regulations. 

The instruction manual forms part of the product and should be kept near the device 
and easily accessible for anyone carrying out the installation, servicing, maintenance or 
cleaning. When passing on/selling the device to a third party, the manuals must be 
handed over along with the device. 
 
 

1.Safety 

 

This device is designed in accordance with the presently applicable technological 
standards. However, the device can pose a danger if handled improperly and 
inappropriately. 

All persons using the device must follow the recommendations and instructions 
in this instruction manual. 
 
 

1.1 Safety instructions 

 

  This device may only be operated in technically proper and safe condition. 

  The device is not intended for use by individuals (including children) with physical or 

mental disabilities, insufficient experience, and/or insufficient knowledge unless such 
persons are under the care of a person responsible for their safety or have received 
instructions regarding appropriate use of the device. 

  Children should be observed to ensure that they are not playing with the device. 

  Only a qualified technician and using original spare parts and accessories should 

carry out repairs and maintenance of the device. Do not attempt to repair the 
device yourself.
 

  Do not use any accessory or spare parts that have not been recommended by the 

manufacturer. These can be dangerous for the user or lead to damages of the device 
or personal injury, and further, the warranty expires.  

Summary of Contents for GHU 4110


























Reviews: