Bartscher FW 80, Operating Instructions Manual

Page: 9 / 36

- 7 -
Our products have been manufactured to the highest standards of quality, functionality and
design. Enjoy working with your new attachment from Jupiter.
Please read this instructions carefully before use.
This powerful, sturdy and handy universal mincer is intended for mincing food at restaurants,
cafeterias, butcher shops, canteens, farms and large households.
Safety information
•
Connect and operate the appliance only
in accordance with the details on the
identification plate.
•
Never immerse the mincer in water or
hold it under a running tap.
•
Always turn off the appliance and pull
out the mains plug when assembling
and disassembling attachments,
cleaning or if a fault occurs.
•
Children should use this appliance only
under supervision to be sure that they
don’t play with it.
•
All parts are not dishwasher-proof.
•
Avoid to contact moving parts.
•
Do not pull the mains connecting lead
across sharp edges.
•
Do not use the appliance if the mains
connecting lead or the appliance itself
shows any signs of damage.
•
If the mains connecting lead is damaged
then it must be replaced by the
manufacturer, its after-sales service or a
similarly qualified person.
•
Never feed food by hand. Always use
the pusher.
•
Repairs to the appliance should only be
carried out by authorized persons.
•
Keep the appliance away from any hot
objects.
•
People (including children), who
because of their physical, sensory or
intellectual capabilities or their
inexperience or lack of knowledge are
unable to use the appliance safely,
should not use this appliance unless
under supervision or instructed to do so
by a responsible person.
Technical specifications
Power: 320 W / 230 V / 50 Hz.
Output: appr. 80 kg / h.
Depending on plate size and meat consistence.
Weight: 8,5 kg
Measurement: height: 40 cm; width: 21 cm; depth: 34 cm;
height to put under: 14 cm
Very low running noise. For continuous duty. Air cooled. Housing of light metal with integrated
carrying handle. Large detachable funnel feeder made of stainless steel; turnable for carrying.
With power indicator light and overload protection switch.
Speed of feed worm on no charge 140 rpm, on full load 110 rpm.
Universal mincer attachment with approved stainless steel plate and knife (4-bladed knife and
plate 4,5 mm for standard equipment).
GB/UK