- 45 -
After the unit has automatically turned off via the overheating prevention system, it
can only be reactivated by pressing the
RESET
button at the rear of the control
panel.
For this purpose, cool the device off, then unscrew the
plastic plug of the
RESET
button counter-clockwise, press
the peg and again screw the plug turning it clockwise. After
those operations the device may be turned on as usually.
6. Cleaning
WARNING!
Before cleaning set the temperature adjustment knob to
“OFF position, turn the device off with use of ON/OFF switch
and disconnect it from the power supply (pull the plug!).
Wait for the device to cool off.
Do not use any kind of pressure water jet for cleaning the device
Protect the device from the water penetration.
CAUTION!
Do not use harsh chemicals or scouring agents when cleaning, as they may
damage the deep fryer.
o
Clean the device regularly.
o
Remove the frying basket and the heating element shield after the device has cooled
off. The heating element may be easily removed from the basin by lifting the device
and removing the control box.
CAUTION!
Never clean the control box (control panel) with use of water and do not
immerse it in water. Moisture must not get inside the control box.
o
The control box with heating element and control panel
should be cleaned with
a moist cloth, soaked with warm water and a mild cleaning agent.
