- 33 -
•
To use hot water put appropriate container
(glass, cup, mug) under the drain tap.
Press the tap lever down and hold it to
receive required amount of water.
Then release the lever, the tap will
close automatically.
•
Control the tank fill level with use of indicator.
WARNING!
Periodically check the fill level, refill with water when required.
Never use the device without water!
•
Before refilling turn the device off.
•
Carefully remove lid and pour required amount of water. During operation touch only
handles and switches designed for such purpose.
•
After use rotate the temperature control knob counterclockwise to “OFF”
position, turn the device off with use of ON/OFF switch and disconnect it from
the power supply (pull the plug!).
•
Leave the remaining water in the tank for cooling down, then drain it with use of
drain tap to another container.
The device is equipped with
overheating/dry operation protection. In case of
accidental start-up without water or with its insufficient amount the protection will
be activated and the device will be automatically turned off.
Disconnect the device from the power supply (pull the plug!) and wait for
cooling down.
Empty the water tank after cooling down.
Press pin (RESET) on the bottom of the device.
Then fill the tank with fresh water and use the device.
RESET
