background image

 

 

 

 

- 27 - 

2.3 Declaration of conformity 

 

 

The device complies with the current standards and directives of the EU. 
We certify this in the EC declaration of conformity. If required we will be 
glad to send you the according declaration of conformity. 

 
 
 

3. Transport, packaging and storage 

3.1 Delivery check 

 

Please check the delivery upon completeness and transport damage immediately 
after receipt. In case of visible damage do not accept or accept the delivery with 
reservation only.  

Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. 

Hidden damages should be reclaimed immediately after notice, as claims for damages 
can only be asserted within the effective period for complaints. 
 
 

3.2 Packaging 

 

Please do not throw away the covering carton of your device as it might be useful for 
storage purposes, when moving or, in case of damages, when the device must be sent 
back to a repair center. The outer and inner packing material should be removed 
completely from the device before installation. 

NOTE! 

If you liked to dispose the packing, consider the regulations applicable in 
your country. Supply re-usable packing materials to the recycling. 

Please inspect the device upon completeness. In case any part is missing please 
contact our customer service center immediately. 
 
 

Summary of Contents for CHEF IDEE CI 10L




















Reviews: