- 29 -
Cleaning the heating plate
o
After it cools, the unit may be cleaned. Cover the frame with a hand, so that water
does not get inside.
o
Remove any scraps of food using a paper cloth. If they cannot be easily removed,
pour a small amount of water into the heating plate and turn the thermostat to ON
.
The plate will heat up and become easier to clean.
o
Clean the heating plate with a soft, moist cloth
or sponge and a mild cleaning agent.
o
Do not clean the plate when it is hot.
This can damage the unit or cause fire.
o
Do not use nylon brushes when cleaning the unit.
This can damage its surface.
o
After drying, place a thin layer of cooking oil on the plate's surface.
Cleaning the cover
o
Clean the unit's cover with a soft cloth or sponge and mild cleaning agent. Rinse
with clean water and dry thoroughly with a soft cloth
Never use solvents, gasoline, abrasive chemicals or chemical brushes as
they can damage the unit's surface.
After cleaning, wipe the unit dry or turn it on for a short while to dry.
Ensure that the unit has been properly cleaned prior to storing it in a dry place.
6.3 Safety instructions for maintenance
o
Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o
When you encounter damages or failures contact your specialist dealer or our
customer service.
o
Only qualified experts may perform repair and maintenance work on the device
using original replacement and accessory parts. Never attempt to repair the
device yourself!
Summary of Contents for A150114G
Page 2: ...2...
