Installation and operation
16 / 22
271107
EN
Electrical Power Connection
— Extractor Hoods with Motors and Fan
Speed Regulators
In the case of extractor hoods with motors and exhaust air volume control means, it
is necessary to establish a connection via a fan speed regulator. It should be
installed externally, wall-mounted, in an easily accessible location, next to the
extractor hood.
Fig. 7
1. Pay attention to wiring outlets for connection cables (Fig. 7).
2. Connect the motor wire (D) and LED lighting wire (E) to a suitable fan speed
regulator.
We recommend installing 1
–2,200 fan speed regulator / art. No. 220120. Follow
indications contained in manufacturer's instruction manual when establishing
connection.
1
–2,200 / 220120 Fan Speed Regulator (is not part of the delivery!)
The fan speed regulator is equipped with
ON/OFF switch and lighting switch.
Fan speed control is executed with fan
speed regulator located at the front panel.
By removing the front panel of the fan speed
regulator, you may access the terminal strip
and execute connections for motor, lighting
and magnetic valve.
Fig. 8
The rocker switch marked with
provides for the possibility of concurrent
switching the fan speed regulator and magnetic valve ON and OFF.
