Operating Instruction
18 / 22
284305
EN
6
Operating Instruction
Warning Indications
•
Ins ert t he bott om c over in the applianc e. The c over acts as a spac er bet ween t he heating element and l ef t-over f ood tray.
Caref ull y put t he c onnecti on box wi th the heating element on t he bac k edge of t he appli ance. T he pi n in t he connec tion box lo wer par t must enter t he hole in the main appliance. T his way t he c onnecti on box is pr operl y mount ed.
WARNING
Risk of scalding of arms, hands, and fingers by escaping steam.
Use the handle to gently remove the lid from the basin.
To remove the pasta basket, use the handle only.
Use protective mitts to remove the lid and the pasta basket with food.
Risk of scalding of arms, hands, and fingers by hot steam.
Never reach inside the basin during or immediately after operation. Before
emptying the basin, make sure the water is chill; to this end, hold your
palm 2
–5 cm above the basin.
Appliance Preparation
1. Remove the pasta basket from the appliance.
2. Before use, thoroughly clean the appliance and equipment according to
instructions in section
6 'Cleaning'
.
3. Dry all washed elements and surfaces thoroughly.
4. Make sure that the appliance is switched off.
5. Make sure that the 'water outflow operating lever' is closed.
6. Through the inlet, fill the basin with fresh drinking water up to the required level.
Take into account the 'MIN' and 'MAX' markings in the basin.
ATTENTION!
Never use the appliance without water in the basin. Make sure the water
level in the basin is between MIN and MAX markings.
Check water regularly and, if needed, add or replenish.
Appliance Start-Up
1. Connect the appliance into a mains socket.
2. Switch the safety switch on.
3. Set the cooking temperature; observe indications in section
'Settings'
.
Summary of Contents for 700FX-E1850
Page 1: ...700FX E1850 284305...
